|
Was able to confirm that the 100pf cap is indeed leaky, took it to work, hooked it to the bench power source, turned up as high as it would go, 37v, + into one end and – on the other via a 1m pull down, and the DVM saw about 25v leaking through it. Repeated this with the 330pf cap and it was 0v.
It will be interesting to see what I get when I try this on the other mica caps I remove from the set, I just wish I had a source that went a bit higher like 200-300v to really push these caps.
But to be leaking at less than 50v is pretty bad!
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|