|
Good evening! I ended up checking all of the diodes and replaced all of the carbon comp resistors. Upon reassembly, I found that some of the adjustments for red and green magnets were no longer working. I removed all 3 magnets and found that the red and the green each had an open coil. The connections looked to be corroded. I was able to fix both sorry looking ends of the bad red coil. Sadly the green magnet is now FUBAR. (I actually managed to solder if but broke it when snipping off excess wire. bummer)
Does anyone happen to have any of these from a neck board kicking around? Numbers on the magnet are S-94731 273S7722
|