Quote:
Originally Posted by Chris K
If I can replicate your bench top rig without blowing 15KV across my chest and heart I think I should be able to align it. I have test sockets for all of the tube pinouts so working under the chassis should be at a minimum.
|
Always use the one hand rule while probing high voltages. Keep your other hand away from anything grounded and stand on an insulated surface if you're on a cement slab. If your uncomfortable or accident prone wear insulating gloves. These chassis rest quite comfortably on their side against the high voltage cage so you can navigate both sides. You need to somehow fix the 5AXP4 in the yoke so it's not moving around. You can see in my photo there's a plastic insulated clamp with an aluminum band holding it against the yoke. I don't know of any source for such a clamp and I believe that came with one of my test crts.