Quote:
Originally Posted by Electronic M
Depending on where it is in the circuit it could just be an optional snubber/spark suppression cap and you might be able to run with it disconnected. Some space command CCIIs have a solid state power switch that can short or open.
Chromacolor IIs almost always have instant on for the CRT and almost never allow you to switch it off. 2 solutions to that are unhook one of the instant on transformer wires, or unplug the set when not in use.
|
I am currently unplugging when not in use, but there are some other issues that seem to be part of the circuit. When I plug it in, the image is unstable, but tapping the power switch clears it up. Seems to also cause vertical hold issues until tapped. So it would seem I need to try replacing the capacitor in hopes it clears it up. If not, I need to find the entire circuit and find the fault.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|