Quote:
Originally Posted by TinCanAlley
I am determined to get this.....
I'm attaching 2 pics. In the one from the underside of the horizontal ouput, I'm assuming there is a high voltage cap and diode. The diode must be the damper diode and the cap is noted as "safety cap". In the second pic, it's the flyback connections from the HOT and there are two more safety caps. All the caps were replaced 12 years ago, except the ceramic on the underside of the HOT. The diode is original to the set.
Am I looking the the right place?
|
Assuming that it is the damper diode, I believe that it could cause the ringing if it's gone leaky. The cap could also do so if it's massively altered in value, or gone open or short. Those components get beat to hell by the deflection circuitry, so it's a fair thing to at least check them out of circuit. Both have to handle very high pulses, so sometimes I just replace them to be safe. One can easily and cheaply acquire new diodes that can handle much more abuse than they could make in the 70s. If you're placing an online order for parts, it would not hurt to buy those parts and replace them. It would be a few bucks tops for the parts, probably less than half of the shipping. If this is the only thing you are buying, then maybe just test the components first to see if anything looks fishy. The shipping from digikey or mouser for that handful of parts would be like $5 for slow USPS, so it wouldn't be worth it for me to buy them alone. Probably end up costing you like $10 for $2.50 worth of parts. If they do no help, that's wasted $10.
To determine what they are, I would have to get eyes on their position in the schematic as I'm not used to seeing those older sets. I watch Shango on youtube fix them, but I've never poured over a schematic for one.
Zeno or others on this forum could easily tell you what the suppression components in your set are without even looking at the schematics I believe. I wish I could be so helpful