|
I have a leader LCG-396. Should I bring up the color bars or white screen and press the chroma button to remove color signal?
While we're on the subject of pattern generators, I was going to use it to redo my convergence, but have a quick question about the center screen magnets. If I understand it correctly, the red and green static convergence magnets move them diagonally and each one is a different direction so you go back and forth until they cross paths just right to converge. Should I move the blue out of center so I can align the red and green, then move the blue into position? The blue moves horizontally and vertically through separate controls. If I get it right I should have a decent white dot on the screen. Then I use the convergence controls with the grid pattern for dynamic adjustments and keep an eye on the center and readjust the static as needed?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|