[TinCanAlley]

So should I put up color bars and adjust the APC as the manual states. Do I need to verify with the scope, or is visual enough?

I did the adjustments because the SM notes on certain settings that don't normally need adjustment after done by the factory. These didn't state that, so I thought they were normal adjustments. I wanted the ACC as I thought it was going to fix an issue I have now. The pattern generator doesn't come up in color. If I adjust the tuner, I can see it trying to bring up the color, but goes back to black and white. When I connect the DVD player via RF, I have to adjust the tuner and get it to the very edge of a strong signal to get color to show. Too far and it goes away, so back and forth I adjust.

I did the static convergence and then dynamic and must note that the sides where I couldn't converge the blue before, this time I was able. So while not perfect, the convergence is better than before and much less noticeable while watching. I think I'll leave as is and finish up the grayscale.