[TinCanAlley]

Originally Posted by old_tv_nut

Does the problem shown in "More color change.jpg" also come and go when playing with the tint knob, or is it constant?

No, what is seen there I believe was due to an incorrect ACP adjustment. When in align mode, the colors were rolling again and in the reds you could see the blue rolling through them and produce that blue blotch as seen in that pic. I wasn't able to get the rolling completely stopped, so I rotated the pot back and forth a number of times and was able to find a spot where the rolling was pretty much stopped. Since that adjustment I haven't seen the blue in red issue, but if it starts again I'm going to go over that board and clean the pots, etc.

I did manage to calibrate the set with the chromatic pots and I let the set run for a few hours. There was no change in tint, so I'm thinking that either the pot is bad, or maybe the wires need resoldering. I had to do that to the volume wires as they broke at the solder point from me taking them out and reinstalling a few times.