[TinCanAlley]

Originally Posted by vol.2

I suspect OP is still trying to figure out the color tint problem from the other thread. https://videokarma.org/showthread.php?t=277532&page=3

Yes. Is there a way to get a moderator to remove previous posts so I can just start one with a title that doesn't note individual issues? I don't know if people are skipping over some as the title might not give clues as to what is really under discussion. It's my fault for starting so many and I just wasn't thinking.

Anyway, I cleaned and reseated after changing the electrolytics on the video processing module and testing resistors on the subcarrier and chroma. After doing so, I recalibrated contrast, brightness, color and tint. 10 minutes later, the tint shifted again. However, I have noted that when this happens, the tint control range changes. After putting it back together, the tint range was wide. From start it went from magenta, to balanced tone and then to green at the other end of adjustment. When the tint shifted, the control had balanced tones near the start and from there it went up to green at the other end. I know it's not the pot as it does the same with the chromatic pot.

I have the original subcarrier module and will reinstall it tomorrow and see if the issue goes away. If it doesn't, then it might be in the chroma module.