Quote:
Originally Posted by vol.2
It's probably in HV shutdown because there's some kind of a short on the board. I think that the H-Size pot was just a coincidence, and the reason it stopped working has more to do with something giving up the ghost.
|
I'm not so sure it was a coincidence... The image stayed on for long on first power on, touching the h-size pot made it die, then turn on if I turned it a bit more. It stayed on until I touched it again, went dark, and stayed off until I touched it again. Each time i touched the pot it flickered and the sound of the flyback did too.
Thanks for the tips! I will try these next time I am able to. I also will try to do a thermal image of the main board to see if it's anything else than the big resistor that gets hot.