|
Finally got some time back on this and found a shorted 4700pF ceramic disc before the diode for the 130V. Since the shorted cap was in parallel with the winding, it took awhile to find. I was getting concerned there was a problem with the power xfmr. I've put 325Vac across the 'motor' cap with a current meter in series, and the current is right where it should be. This set has got seven of the Zenith special 22-5001 white caps. I believe these are 0.015uF, but not sure what voltage. I'm assuming at least 2kV. Any thoughts?
|