|
Okay, 2 more questions about using this new to me unit....
The Leader unit I have has a BNC for connection to a scope for triggering. This unit also has the triggering ability, but it doesn't have a BNC connector. It uses VOM 2mm pin leads with minigrabbers. I'm assuming I should connect a probe in 1x mode and connect the leads to it? Or is there a BNC connector that is designed to connect the leads to?
It also has a video out feature that inserts the signal directly to the video circuit. It says to insert directly after the detector. How do I find this point? I'd like to bypass the tuner and IF to see if there's any difference in the color issues. Not sure this is the right way, but I figure that removing any possible source for testing can't hurt.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|