|
Well I've just remembered another issue I notice some time back, but didn't address it as I hadn't completed all the hardware repairs. Now that those seem to be done, I'm going after this one.
When adjusting brightness and contrast, the grays are more green than gray. The whites are perfect, so I'm not sure where the green is coming into play. Maybe I didn't adjust the G2s properly? I have to adjust them using a B&W image as the setup switch won't bring up the lines as noted in the SM. What I did was turn them completely down and then turn on until I saw the color in the image. I then did the next until I noticed the color blending with the last one. The finish one I turned up until it looked like a B&W image. After that I adjusted the taps to remove color from the white areas.
The attached pic is a bit greener in than what I was seeing. I tested the CRT a couple of times and it tests good on all guns.
So how can the whites be so white while the grays are greenish? If it were a color gun imbalance, wouldn't it affect the whites?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|