|
Well what do you know. I have another question.
I am searching for the 3 pots I don't have for the convergence board, but Zenith parts aren't out there. I started looking under the other part numbers. I managed to find all I need, but I'm not sure if they'll really do the job. The resistance numbers are off. For instance, the 300 ohm factory's replacement is 500 ohm, 60 ohm replacement is 50 ohm, 120 ohm replacement is 100 ohm and so on.
I can see how the 500 ohm works as it goes beyond the 300, but the others don't even reach the original. Zenith did put them down as replacements, so they must work, right?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|