Quote:
Originally Posted by BeamT
I believe you can run this set without the IF module in place. The 125v B+ supply interlock does not run through the IF module. You wouldn't need to feed a signal to the IF output, you should still have a raster. You might need to turn the brightness up a bit to see it.
If you are going to replace C202 in the horiz blanker, it needs to a temperature compensated N750 Capacitor.
|
If by the IF output you mean connection 5 on the IF module (Video-Sync-Chroma), that's where TP C1 is located, so I could clip the lead of the generator onto that point on the top of the chassis.
I have the two capacitors in my cart now and they are the part numbers from the SM and the C202 replacement is N750.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|