View Single Post
  #90  
Old 04-17-2026, 12:40 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,008
Pulled the tuner assembly. I figured out how it was assembled as it is a cluster that contains the remote board, UHF, VHF, motor and control as well as the tuner control center. The SM has only the remote board and that's in the supplemental add-on. The rest is not included. There are 4 electrolytics on it and I found another connected near the motor. My goal is to replace all the old caps, clean up all connections, oil the motor and put it back together. While I have no expectations this will help in anyway with the jailbars, I'm sure it can't hurt as the TCC is where the individual tuning controls are. I'm not sure what I'll find when I take the board off the back of the unit, but I'm sure there's something in there that might need cleaning/lubing as the motor turns something.

Wish me luck!
Attached Images
File Type: jpg Tuner Control Center Face.jpg (106.8 KB, 7 views)
File Type: jpg Tuner Control Center.jpg (102.1 KB, 7 views)
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
Audiokarma