|
I got the NOS flyback, but I'm questioning the instructions with it. I am not planning on installing it and if I do, it's only as a last resort. The one installed in the set is S96453-01. The replacement is -02. The sheet sent with it says that if replacing a -01, I need to remove the .0006 2KV ceramic before installing. I've compared each unit and other than the new one having the safety caps already updated, and a single resistor replacing 2 in parallel on the current one, I see no real difference. If the current one has the 2KV, and all other components on the new one are the same connections and values, why remove the capacitor?
Thing is, if it does need removal, then I have one to test in the circuits that use this capacitor (damper, boost, etc.). Haven't been able to find this value in 2KV.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|