|
While removing capacitors from tuner control board, the solder sucker not only took the solder, but the pad as well. These are the worst pads I've seen. Since I have no idea how to restore the pad, if even possible, I am thinking of soldering the lead to the next joint on the trace. Just want to make sure this is okay before I do it. Pic attached.
Also, removing the board meant two gears falling out. I figured out their alignment, but hope it all goes well as the only way to know is reinstalling for testing. Wonder why this part of the tuner isn't in the Sams supplemental along with the remote board that is part of this assembly.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|