|
Not my best work, but it should hold. Checked continuity to surrounding components and all is well.
Also, guess Zenith thought of everything, but not having the SM for this assembly, I stumbled across it by accident. The issue with lining up the gears and making sure they were still aligned after assembly seemed an impossible task, but it seems there is a small hole in the board, right above the point where the two gears mesh and it is used to verify the red and black are correct. I used my video microscope over the hole with a bright light and could see the black tooth of one gear between the two red teeth of the other gear. Hard to see colors in pic, but they are there.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Last edited by TinCanAlley; 04-26-2026 at 11:36 AM.
|