Okay, fixing the insertion issue with the transistor fixed it. I put the board in and it fire up. Slight adjustment of the horizontal hold and it's all good. I'm going to let it run for a few hours to make sure it has been fixed. Now to use the removed board to practice my troubleshooting and repair. This board is exactly what I need for that.
Appreciate all the help. I'm sure it won't be the last time I need it, that's for sure. When this is done, I have a B&W RCA 12" from '75 and a 13" Hitachi from '82.  Not to mention a Canon Monochrome computer monitor that has a weak CRT. The socket adapter I have for my B&K had a couple wires pulled from the socket. I asked the previous owner and they said something about that socket had the wrong wiring for many of the monochrome monitors and he said someone switched a couple leads. Now I'm uncertain of using it, so I need to find the wiring diagram from B&K and compare it to the connector of the tester to make sure they all line up. Once that is done, I'm sure I'll have to go the rejuvenation route with it.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|