|
What determines horizontal position in this set? I'm assuming it is something on the horizontal module as after swapping back to the original module after the failure of the upgraded module, the image is now off center horizontally. It was never centered perfectly with the newer module, but it was about 1/2 to the right. With the original module reinstalled, the image has move another 3/4 to 1" to the right. The horizontal control is all the way to the stop. If I rotate it away from the stop, the image moves more towards the right.
If a module swap is enough to mess with horizontal centering, is that because of something on the board out of spec, or the way it is interacting with the horizontal control? Really would like it at least back to where it was previously.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|