|
I'm going to install the NTE526A in the set Friday. It's another test to find the source of the jailbars. When I replaced the focus divider years ago, the wires were long and I cut them to length. I have enough of the black to go from the new tripler to the focus connection on the flyback, but not enough of the white to reach the pot. I found some 18AWG 30KV wire in white and it should be here tomorrow. I really didn't want to cut the wires off the divider as I might end up keeping it and the tripler if the new one doesn't fix the bars. This way I have the OEM back and the NTE as a spare. If it fixes the bars, is there some kind of tests I can do on the OEM? Resistance? Diode check?
And of course a question. Is it okay to run the new tripler without RTV on the connections for testing? I want to be able to quickly swap it if it doesn't solve the bar issue. If not, is there something else less permanent I can do for testing to protect from arcing?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|