|
I got my hands on the plans to gut a 9-57 horizontal board and piggyback a 9-90 so I can use my old RCA VCR without the waving at the top of the screen. Only issue is I don't know how the B+ 125V is going to like/not like it. Since the B+ is passed module to module and the horizontal module is the last in line, does the B+ line care if it is cut at that point? With the 57 board, it goes in and out, but isn't used by anything on the board. If I gut the board so I can just use it as a base for the 90, the return path for the B+ will be severed.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|