[liammc00]

Well things keep going badly with this set. I went to turn the set on today but the only thing that happened was the power relay clicked but no HV. the cause was bad solder joints i think as yesterday it worked fine but after i turned the set off i messed with the thermistor and apparently i bumped the power resistor right next to it. i took the chassis out and found and fixed the solder joints and found that a lot of big value capacitors had failed like 1000uf 35V tested at 299uf but had 0.00 ESR that was true for most of big caps on the main board. After that checked my work and then i put the chassis back into the set. than i spent a very long time getting everything plugged back in making sure they went where they supposed. I went to test the set and now its completely dead. No fuses are blown and I'm getting power from stand by supply which matches what the schmatics says.