[Jonathan]

Hello,

I'm restoring a RCA 630TS clone, an Air King A1000. I replaced every electrolytic and paper crapacitor with modern ones, added AC line supression caps in place of the old micas for safety and RF noise supression. I may replace the mica coupling caps in the Video IF section if they are bad. Since all the work is done underneath, I need to figure out how to mount the flyback.

When I received the TV, three recifier tubes were missing from the HV section, and the flyback was free moving inside the HV cage. I removed the cage and I'm unsure how to mount the flyback securly. I can't really figure it out. Is the flyback mounted on the HV cage somehow or is it mounted to the chassis? I think the flkyback is good. If not, I have two other good 211T1 flybacks for a 630TS or clone. I purchased all the missing tubes, and just need to assemble it and put the CRT back in to see if any smoke will come out or not.

If anyone has any ideas, please let me know.

Thanks again.

Jonathan