|
Sounds like it's time for the freeze spray! use isolation transformer when checking...power line is connected to chassis.
Spray the freeze spray on resistors and ceramic caps and see if you can get the audio to come back once it's heated up. Do not spray it on the hot tubes. YOu may have to use a heat gun or hair dryer to help heat up the area to coax out the failure mode.
Probably not electrolytics as there is no hum...only other electrolytic in this set is in the FM ratio detector (if it used that system).
Last edited by Chad Hauris; 07-16-2005 at 11:46 PM.
|