[polaraman]

This is SAMS 459-1 if anybody wants to follow along. I may also need some help along the way.


Only 2 black beauty caps were left in the set. C54 was on the Video IF printed board. The other was C138 and it is on the 120v AC line coming into the set.

I found some burned wires coming off the green control on the back of the chassis. The wires connect to the control, R175 and a terminal strip. I will have to trim the wires to get back to some good copper. The resistor tested good. I just hope the control is good. The wire was actually cracked right at the spot R175 was laying on it. I am glad I found it. It could have drove me nuts later. I posted a pic of the situation.


polaraman