I finally got the set home today, what a beauty!
But it needs a great deal of work. The plastic cap the 10BP4 is loose, which bothers me. Fine wires connect the stuff inside the tube to the pins. What is a good way to glue the cap and what glue do I use? I want it to be safe and secure. Also, the cabinet is in good condition. There is a piece of glass covering the screen and bezel. The 630TS's I've seen never had that and am wondering if it's "stock". And it's also the first time I saw an electromagnetic ion trap. Looks like it's going to be more trouble than the perminant magnet ion trap used in the Air King A1000. Some tubes were also loose as well.
The HV section is a different story. One of the tubes was missing. It definally looked like it was in bad shape, just like the one in the Air King A1000. Why are the HV sections in 630TS and it's clones are always missing tubes, bad tubes, broken tubes, etc? I suppose these are the tubes that are replaced most often?
Thanks.
Jonathan