|
I have to crank up the drive to .05V/Div to see it good on the screen. but I have to mess with manual trigger, because of the noise.
I made the motor servo and the video/seperator circuit on two seperate power supply batteries, two seperate grounds. That doesnt make since either, how does the sync pulse return, if there is no return path between both stages (grounds are seperate). Both are 12V batteries.
I can see NBTV if I brake the disk. otherwise it spins too fast. motor is getting full 12v.
Last edited by mbates14; 08-22-2005 at 02:21 PM.
|