ok, I ran some more tests.
With the sync backwards, as we know, it tries to work.
Now, If i bring the optical fork closer, it speeds off. So, I switched the sync inputs back to normal. The disk went full speed.
So, I made the fork closer together, like i did before, and still nothing. no signs of speeding down. I got them so close, it was scraping the disk. I got a good strong signal from the fork too.
So, i moved the syncs back the other way, and it started to work again, and like I said if i move the fork, it speeds up. I move it back it works fine. But no accurate sync. hmmmmm. sooooo confuzzled.
|