[mbates14]

but its working now.

but it only works right when I have the speed pot set right. If i speed it up or down with the pot, it wont lock.

oddly, but surely. I got this PLL chip from radioshack when they used to carry them. They dont anymore.

itll work, if I intensionally slow the disk down, it locks the frame right back in place. But has a tendency to get a spik from the sync pulse, and overshoot it. (frame starts rolling upwards.

More or less, i have line lock, but not so much frame lock. I covered one of the holes btw.

if i cover the fork, nothing happens, but it wont sync any more, when the frame starts to roll backwards, itll just keep on doing it.

but thats when the signals are switched than from the schematic.

If i switch them back, the motor speeds all the way up. never slows down. Even if I bring the fork closes together. Still dont matter. It only works when backwards.