|
ctc-100 and improving tuner
hi guys,one thing i did to my ct-100 was unplug the 300ohm antenna connector directly from tuner and unsoldered the twinlead,i then soldered in the connector (the 2 pin connector that plugs directly into the tuner top) a 75-300ohm matching x-former making sure the 300ohm part was as short as possible,then plugged it back into the tuner,i then made up a short piece of RG-6 coax to go from the tuner to the rear of the set,then attached that to my in house rf system to the wall plate.
as you can see from previous pics it plays fantastic,that short piece of twin lead used back then can really add noise.for cosmetic purposes i left the old twin lead there so that if i ever decide to change it back it could be done real easy.
terry
|