|
The flyback stage gets its DC through the damper so no damper operation=no HV. Checking resistance on the flyback can give you a clue as to its condition, just be sure set is unplugged/all caps are discharged.
You really will need to replace all caps to be able to troubleshoot well...its a wild goose chase with old caps in there as they cause so many problems.
The yoke has probably disintegrated due to heat on the plastic...I would just leave it alone, it should be OK unless some of the coils have shorted.
What is the KCS chassis number...we have all sams through the 70s so we should be able to scan.
This isn't a metal crt model is it? If it is watch out! as the HV connects right to the metal shell with no insulation.
Last edited by Chad Hauris; 10-06-2005 at 01:56 PM.
|