I went thru the remote chassis and still have some questionable voltages. This is just on the bench with 120 ac going to it, no input, as directed in the schematics. I shielded the first 12ax7 as it has a ground spring on it, plus without it some of the functions just lock on with no input so I think it's supposed to be there. The rev. motor relay pulls in at power on, probably normal as the reverse motor keyer is called 'rev off' so I think that keyer turns the relay off instead of on like the others.
When installed in the tv, the operation is iffy, sometimes have to have the remote very close to the mike for it to pick it up, sensitivity of the functions changes when I move the keyer tubes around like they are just on the border of working sometimes and a diff. tube will allow them to work or not work, the tubes all test good. Anybody see any suspects as to why some fo these voltages are way off, mainly that 61 volts that supposed to be 165? That doesn't look right at all.
http://mysite.verizon.net/resoctff/photoalbum/
The 40 mfd and 5 mfd filters have been changed with no real improvement. thanks!