[frenchy]

Damn I'm about to shove this set out to the curb. I decided to test the hand unit to see if could see if possibly it is cause of seemingly low power of the remote transmitting. Realize my tester has a frequency measurement on it, great, so I hook it up to ground and a terminal that leads to the transducer, sure enough I get 4 different frequencies in that 19-24 range like the schematics. And measured voltages coming out of there too which were kind of wacky on the meter (AC changing around). But now the remote refuses to do ANYTHING when pointed at the set even if I shove it right up to the tv's mike. I don't know what happened, maybe the one transistor has finally given out. There's nothing left in the thing that could break, I changed the two flaky caps that affect all frequencies, there's only 4 resistors check out, all the other caps are specific to one frequency only, I don't get it. Wonder what the transducer is, maybe something I did blew it? All I did was measure voltages and frequencies. How can I test the transducer? This set has been one big pain in the ass, one minute I think I got it and then it bites me like this.