|
Hey all, The set has an "N1 Chassis" and there is no discernable model in or out of the set. There is no power transformer, so i guess the tubes are directly connected in series string. I did some investigating tonight and found a disconnected wire near the disconnected cap. One end goes to the large resistor and focus pot. on the flyback/HV board, and then there are 3 options (unused pins on PC board) for where it has to connect: 1- pin connecting to the last wire on the yoke, 2- base of unrecognizable tube with top connecting to HV assembly , or 3 - on pc board near Vert Height/Linearity pots/small resistors. I know that i am not helpful, but the thing is filthy and messy and hard to work with right now. Oh yeah -- the HV (nominal) is 22.0 kV accordint to the only surving label in the whole set which is on the tube itself.
The HV assembly states to replace HV rectifier with a GE 3AD3 only.
|