|
1) your mono picture of the big set shows less green on the yellow bar, so you would expect its yellow to be less green
2) The red looks darker and the blue looks brighter on the CT100 than on the large screen. The yellow looks greener and the magenta looks bluer. I would check the white point (blue and green drive settings) on the CT-100. If your white is lacking in red, that could be part of the difference. Ideally, you should have a gray background wall in the room lit by daylight or artificial daylight to compare to, or at least be able to look outside at daylight for comparison. Anyway, in turning idown the green and blue drives, it helps to go too far (slightly pink whites) if you can get there, then return to a neutral white, rocking the controls back and forth while you zero in on the neutral point.
|