|
holmesuser01, that's what I think too. A wave form should be produced at the cap. It should rise and fall as the small value cap charges and discharges. Next weekend I'll replace them. The problem I have is that I can't set up the 'oscope in a safe mannor at my parents house, otherwise I'd check wave forms and voltages to see what's going on. Thanks for your input.
jamie, it's good to know you as a source for parts. The picture on that set is fantastic! As for the problems you're having, clean all the contacts pins on each board with deoxit. Clean the tuner with a high quality cleaner. If you press the color switch slowly, you'll see that it has an effect on the contrast, color etc. At one point, the picture will become foggy. Similar to your problem. Don't over look the VRs behind the door. Both the manual and pre set controls should be cleaned. They're located on the bottom inside of the set. That should clear up your problems.
Ron
|