|
After going through the capacitors again I can see no visible problems. With both rectifiers out, there is no excessive draw in current, but of course, there is no B+ either. The only caps connected to chassis ground around the transformer was a 20uF used for filtering B+ on the audio, and 80uF. The one on the bracket and the one closest to the outside of the chassis were all on insulators. All of their commons were connected to -100V. All of the negative ends are connected to the transformer lead with is the center tap of the B+ winding. The smaller 1000uF/250uF commons are connected to +275.
I'm going to recheck the electrolytics again and do a resistance check on the rectifiers and see if that fixes anything.
Thanks again.
Jonathan
|