|
I have the Beitman's '51 book which includes this chassis, but the schematic is hard to read. I'm not sure if I could get a good enough copy for you, but would be willing to try if need be. Some I can tell you about: to one side of the speaker field (the selenium side) there is a 100mf/300v; the other side has a 125mf/300v. The cap connected to the joint of the 2 seleniums is listed as 140mf/150v. Between pins 1 and 2 of the 6AL5 ratio detector you will find a 10mf/50v. It looks like pin 8 of the 6V6 audio output has a 20mf/25v. Pin 3 of the 6J5 goes through a 470K resistor to a 20mf/250v cap. Pin 6 of the 6AU6 audio amp has a 20mf which I think is at 250v but the print is very small. Pin 8 of the 6V6 vertical tube is 100mf/30v while there is a 60mf/250v cap which you will find connected to the wiper of the focus control, among other things. Maybe that will get you started until somebody finds the sams, which should be easier to read then this thing Motorola put out.
__________________
Bryan
|