|
I put it back together with those extra resistors, and it seems to work. But after watching it for a while I can see that the vertical still isn't right, better, at least the whole picture is on the screen, but still a bit compressed vertically at the bottom and expanded vertically at the top. Everything checks out though, so I'm still not sure what's causing it, I have an extra yoke for this set, I might try that later, but its really not so bad now as it was, so I might move on to another set first. Again, if anybody can tell me why I needed those resistors, at this point I'm just curious as to what is going on. I thought the resistance across the antenna input of these sets was supposed to be 300ohms, with these extra resistors it should be around 20?? But then it works like this with the VCR or a RF modulator, but if I just want to connect an antenna it works better without the resistors.
|