[Charlie]

Once you go thru the caps (and also check the resistors) in the verticle section, you'll fix that roll. If memory serves, there's probably one of those damn combination-components in the verticle section. It's a tan rectangular flat piece with several leads on it... it's made up of several caps/resistors. Those usually go south. Sams will give you a schematic of it on the main diagram page. If you get the caps and resistors, and follow the schematic, you can build one to replace the original. Just gotta make sure you follow the diagram carefully. Make sure you number the leads that come off the end result so that you'll plug 'em in the right spots. I've built a few for some of my sets with really good results. It's just a little time consuming.