Thread: Could this be used to sub 6kv transformer
View Single Post
  #2  
Old 05-07-2006, 11:55 PM
John Folsom's Avatar
John Folsom John Folsom is offline
VideoKarma Member
  
Join Date: May 2004
Location: Melbourne Florida
Posts: 932
Eric,

If thet output is 6KV RVS AC, it is a bit more than you want. and 30mA is WAY more than you want.

A better choice is one of the DC-DC converter modules which run on 12 VDC in put (or something close to this) and output 5-6KVDC and a few hiundred microamps.

you can build a doubler to generate the 12VDC from the 6.3VAC filament voltage.
Chuck A. has done this, and can advise you on how itis done.
__________________
John Folsom
Reply With Quote