[Jeffhs]

Originally Posted by Nugrl

Wow! I appreciate all the info you all have been able to give me. This sounds like a very informative forum with very intelligent people! That is what I really like about the web. There is always someone out there that can help you! ok, but heres another question for you. How do I get to the so called "OSD Setup Menu" to let the tv do the "AUTO CH. SEARCH" ? If I could at least get to that, I would be set! ;-)

I'm not familiar with the SC1923W Zenith, but here's a procedure that works with my SMS1917SG Sentry 2. Yours will most likely be similar. On the front panel of your set there should be a button marked "MENU", and one identical to it on the remote. Either will work. Press this button once. A menu should appear on your TV screen with several options. One of these should be "AUTO CH. SEARCH" or similar wording. Place the on-screen cursor over this selection and press the SELECT button on the front panel or remote once. A message should now appear on your screen: AUTO CHANNEL SEARCH - PRESS ADJUST KEY TO CONTINUE. Press one of the ADJUST keys to start the search. Depending on the model (again, not being familiar with yours, I don't know how it shows what I am about to describe), you may see several rows of colored dots on your TV screen, indicating the search has begun and is now in progress. Once the search is complete, a message will appear on your screen: AUTO CHANNEL SEARCH COMPLETE. TUNING BAND IS CABLE-CATV. XX CHANNELS FOUND (where xx is the actual number of broadcast and/or cable channels found by the system). Press the ENTER button on the panel/remote to return to the program picture and you're done.

Hope this helps.

Kind regards,