Quote:
|
Originally Posted by Jeffhs
I'm not familiar with the SC1923W Zenith, but here's a procedure that works with my SMS1917SG Sentry 2. Yours will most likely be similar. On the front panel of your set there should be a button marked "MENU", and one identical to it on the remote. Either will work. Press this button once. A menu should appear on your TV screen with several options. One of these should be "AUTO CH. SEARCH" or similar wording. Place the on-screen cursor over this selection and press the SELECT button on the front panel or remote once. A message should now appear on your screen: AUTO CHANNEL SEARCH - PRESS ADJUST KEY TO CONTINUE. Press one of the ADJUST keys to start the search. Depending on the model (again, not being familiar with yours, I don't know how it shows what I am about to describe), you may see several rows of colored dots on your TV screen, indicating the search has begun and is now in progress. Once the search is complete, a message will appear on your screen: AUTO CHANNEL SEARCH COMPLETE. TUNING BAND IS CABLE-CATV. XX CHANNELS FOUND (where xx is the actual number of broadcast and/or cable channels found by the system). Press the ENTER button on the panel/remote to return to the program picture and you're done.
Hope this helps.
Kind regards,
|
That set was made before they had onscreen menus and autoprogram.The channels have to be set manually.Zenith started having that feature with the digital sets of the late 80s.