|
frenchy.
You do need the yoke connected to get normal voltages. I think that may be why you have low voltage on the horz tube cap that goes to the flyback. Also I think most tube color sets have that type of system. In a way it does cut off the hv so it could be the hv interlock, But it may be the line cord you are looking at. Also I may be useing the wrong word. {interlock} Throw in the 1v2, put it in the cabinet and see what happens.
I would try and lower the ac line voltage, Just in case the arcing is still a problem.
That would be great if it was just the 1v2.
Good luck and have a great evening.
ED
|