View Single Post
  #2  
Old 08-08-2006, 07:45 AM
RetroHacker RetroHacker is offline
Electronics Accumulator
 
Join Date: Jan 2005
Location: Niskayuna, NY
Posts: 464
Most of the time, the chassis will be secured with four bolts that go through the board that it's mounted to and into the chassis, and the chassis comes out through the bottom, leaving the faceplate mounted into the console. You have to remove all the knobs first. They made lots and lots of Astro-Sonic sets, and yours could be different though, but typically the tuner/amplifier chassis is mounted to a flat board on the "bottom" of the chassis, even though it's probably sideways in the cabinet. Make note of wires before you unhook anything, and there typically isn't enough slack on the wire to let you get the chassis too far out without disconnecting anything, so unhook first, then unbolt.

-Ian
Reply With Quote