|
Thanks guys, you were a great help. I measured B- (or -100V) to ground and gave me around 500 ohms like it should. I measured B+ (from the rectifier filament to ground and it measured infinite, because I don't have the rest of B+ connected to anything yet. Total resistance between the two ends of the B+ winding is around 23 ohms.
Everything seems normal there just as you guys said. I measured the filament resistance of both rectifier tubes. One reads 0.3 ohms. No filament to plate shorts as both plates read infinite from the filament pins. The other rectifier reads an open filament. Obviously this one is bad. Is the other one good with those resistance measurements?
Thanks.
Jonathan
|