|
Hi John, thanks for the info. I think this thing will work out and most of what you said was close to what I had in mind. Yes the green lead is rated at 10A. Now my unit has the Brown damper lead reated at 2.7A. Will thet present a problem? As far as the "two reds" go I mean I have 2 reds and a single red/yellow stripe. I have two of every color.
I measure 1.7 ohms between the blacks, .2 between the greens, .2 between the yellows, 65.2 between the reds, and 34.1/31.2 from either red to a red/yellow.
The chassis is a KCS-34b.
Do you have a schematic for this particular chassis? I already know other models that look the same have diffferent value components. I need to find out exactly where to solder every wire. The damper, rectifier, and other filaments should be simple enough. All of the red or red/yellow still confuses me. I'm asking for quidance because I want to be sure on this and not cause more problems.
Maybe these readings and more info will help you decipher some of this stuff. Efforts greatly apreciated!!!!
Thanks
|