|
I just went into the files and dug out 348-8. According to the Sams the buffer is .033 at 1000 volts and there should be a .0068 at 1000 volts between the plates of the 12AQ5's which is pin 5. There is a model 844 HR that has some additional components and a few with different values. The .5 at 100 is a bypass capacitor from the 12 volt line where it's connected to the centertap of the primary of the vibrator transformer to ground. It's just for hash and noise supression, any voltage over 100 would be fine. The B+ coming off the cathode of the 12X4 should be 240 volts. Send me your mailing address and I'll make a copy of this Sams at work tomorrow.
__________________
"proximo satis pro administratio"
KAØSCR
|